o Mirrors, turn signals and any racks or carriers removed
o Headlight and brake/taillight should be removed
o All side and center stands removed
o Case covers or frame sliders should be installed The following
should be drilled and safety wired:
o All oil drain plugso Oil filter (spin-on type filters must
be secured with a hose clamp and then wire the hose clamp
to a fixed spot to prevent rotation).
o Oil filler and/or oil dip sticko Radiator cap
o Cooling system drain boltThe following should be properly
torqued and siliconed to prevent backing out:
o All brake caliper mounting boltso All brake and clutch
line banjo bolts |