o Mirrors, turn signals and any racks or carriers removed
o Headlight and brake/taillight should be removed
o All side and center stands removed
o Case covers or frame sliders should be installed
The following should be drilled and safety wired:
o All oil drain plugs
o Oil filter (spin-on type filters must be secured with a hose clamp and then wire the hose clamp to a fixed spot to prevent rotation).
o Oil filler and/or oil dip stick
o Radiator cap
o Cooling system drain bolt
The following should be properly torqued and siliconed to prevent backing out:
o All brake caliper mounting bolts
o All brake and clutch line banjo bolts |